COR Bio Photopolymer Resin for 385nm DLP 3D Printers

COR Bio features an unprecedented combination of toughness, biocompatibility, and autoclavability – a critical triad for end-use healthcare and consumer applications.

• Best-in-class ductility (~100% elongation at break)
• Ability to survive steam autoclave sterilization
• Amazing impact resistance (un-notched IZOD >500 J/m)
• Very high working temperature (glass transition >135 °C)
• Grade 0 Cytotoxicity (ISO 10993-5)
• Excellent polar fluidic compatibility, including 10-100x lower moisture absorption than typical photopolymer resins

What are innovative engineers making with COR Bio today?

• Medical Device Components
• Dental Products
• Surgical Tools
• Consumer Products
• Podiatry / Orthotics
• Milli- and micro-fluidic devices

Important Notice: COR Bio photopolymer resin is intended for use by trained additive manufacturing professionals working in industrial, manufacturing, and laboratory facilities. At this time, we discourage printing with COR in home or office environments. We reserve the right to cancel your resin purchase if you cannot meet the safety requirements. If you do not have access to this type of facility or training, we would be happy to print COR parts for you at https://polyspectra.com/start-here ! 

Please Review All of the Requirements Before Placing Your Order

Questions? Just give us a call 510 390 9145 or email support@polyspectra.com

Facilities Requirements:

• Well-ventilated print and part-cleaning areas
• Chemical waste disposal (for used resin and used part-cleaning solution)
• Read the SDS => https://geni.us/COR-Bio-SDS

Equipment Requirements:

• Printer Ventilation: A well-ventilated 385nm DLP 3D printer
• (see docs.polySpectra.com for the validated and exploratory printer lists and suggestions for ventilation options)
• Refrigerated Storage: A refrigerator or freezer to store resin below 5 °C
• Please note to refrigerate on arrival
• Warm Before Printing: An oven or warm water bath to warm the resin to 40 °C
• (see docs.polySpectra.com for the validated resin warming procedure)
• Ventilated Cleaning Area: A well-ventilated area to clean parts
• (see docs.polySpectra.com for examples and recommendations)
• Post-Curing Oven: A vacuum oven, or exploratory post-cure unit
• (see docs.polySpectra.com for the validated and exploratory equipment lists)
• COR Bio can be cured in a consumer microwave using polySpectra waveCure

PPE Requirements:

• Read the SDS => https://geni.us/COR-Bio-SDS
• Nitrile gloves
• Safety glasses
• Lab coat
• Long pants
• Close-toed shoes

Consumables Requirements:

• polySpectra SupaRinse is our validated part-cleaning solution
  
• Please contact our team to try SupaRinse support@polyspectra.com
• A list of exploratory alternative cleaning solutions and solvents can be found at docs.polySpectra.com

Training Requirements:

• Trained additive manufacturing professional
• Experience in the safe operation of SLA/DLP/LCD resin 3D printers
• Training in the cleaning, post-curing, and finishing of printed parts
• Training in the proper handling of resin, cleaning solvents, and chemical waste

By placing an order for COR Bio resin, you are attesting that the facility, equipment, and personnel at the shipping address meet the safety and training requirements above. We reserve the right to cancel your resin purchase if you cannot meet the safety requirements. If you do not have access to this type of facility, equipment or training --- we would be happy to print COR parts for you at https://polyspectra.com/start-here !